Robotics & Automation News

Where Innovation Meets Imagination

expertise

Kuka wins ‘major contract’ from Mercedes

by

Kuka says it has won what it describes as a “major contract” for body-in-white production from Mercedes-Benz. Body-in-white is the stage in automobile manufacturing in which a car body’s frame has been joined together – before the engine and anything else has been installed, or the body painted.

Kuka says it was able to convince the German premium car manufacturer of the deal towards the end of last year.

The order from Mercedes-Benz is for the engineering and construction, as well as the assembly and commissioning, of several body-in-white production lines. In the future, various vehicle models will be produced in this way. [Read more…] about Kuka wins ‘major contract’ from Mercedes

Panasonic to apply industrial technology to solve society’s problems

by

Panasonic says it aims to tackle the needs of smart societies – from healthcare to retail and logistics – with industrial technology. (See video below.)

The company says it will use its broad expertise in sensors as well as drives technology, and its technologies in industrial robots to meet the challenge.

Panasonic says its approach is based on “pragmatic solutions that work with people”, and this can be defined within three core pillars: augmented solutions, stand-alone solutions, and complete robotics automation solutions. [Read more…] about Panasonic to apply industrial technology to solve society’s problems

Honeywell to provide flight control technology for unmanned cargo plane

by

Pipistrel has selected Honeywell’s Compact Fly-By-Wire system for the Nuuva V300 cargo unmanned aerial vehicle (UAV), choosing a modern, lightweight, highly capable system with a proven architecture ideally suited for their autonomous cargo UAV.

Fly-by-wire computers act as the “brains” of an aircraft’s flight controls by operating them electronically and can be found inside nearly all large fixed-wing aircraft today.

The compact version from Honeywell has features derived from decades of expertise in fly-by-wire systems for airliners, but it’s much smaller – roughly the size of a paperback book. [Read more…] about Honeywell to provide flight control technology for unmanned cargo plane

Kuka showcases new fully automated sealing and damping system at Audi

by

Kuka is showcasing a new “fully automated sealing and damping system” that the company has implemented at Audi.

In the automotive industry, it is becoming increasingly important to produce sustainably and efficiently.

As an alternative joining method, adhesive and sealing technology in body-in-white production makes it possible to reliably join a wide variety of materials. [Read more…] about Kuka showcases new fully automated sealing and damping system at Audi

Epson Robots signs Olympus Controls as distributor

by

Epson Robots has signed Olympus Controls, an engineering services provider specializing in the integration of motion control, machine vision, and robotic technologies, as an official distributor of Epson Robots automation products.

As factory automation projects become increasingly complex, strong collaboration between distributors and robot vendors is essential.

Olympus Controls’ decades of engineering expertise and deep industry knowledge, combined with Epson Robots’ reputation for easy-to-use, proven, innovative technology, will help manufacturers reach today’s challenging factory automation objectives. [Read more…] about Epson Robots signs Olympus Controls as distributor

Micron launches robot design challenge

by

Micron Technology, a provider of memory and storage solutions, has launched its UV Robot Design Challenge.

The company says the competition is designed to address the growing need for reliable, low-cost ultraviolet light robotic solutions that can help automate disinfection and potentially combat the spread of Covid-19 and other diseases.

UV germicidal irradiation has been shown to destroy the RNA in viruses and can help mitigate the transmission of microbes, which can remain active on surfaces for prolonged periods of time. [Read more…] about Micron launches robot design challenge

nTopology and Oak Ridge National Laboratory partner to develop additive manufacturing technologies

by

nTopology has entered into a Cooperative Research and Development Agreement with Oak Ridge National Laboratory to advance the capabilities of additive manufacturing through integrated software toolkits and embed ORNL expertise into nTop software.

The plan is for these capabilities to be made available commercially to the broader advanced-manufacturing market.

The collaboration incorporates foundational nTopology software with ORNL-developed machine control capabilities on large-scale polymer additive manufacturing systems. [Read more…] about nTopology and Oak Ridge National Laboratory partner to develop additive manufacturing technologies

HAHN Group acquires DAHL Automation

by

The HAHN Group has acquired DAHL Automation, expanding its competence in the field of intralogistics and autonomous mobile robots.

DAHL Automation is an integrator for robotics, collaborative robots, as well as autonomous mobile robots and automated guided vehicles.

The company has 30 employees currently employed at its headquarters in Meinerzhagen, Germany. [Read more…] about HAHN Group acquires DAHL Automation

ThyssenKrupp and Wilhelmsen to develop additive manufacturing solutions for shipbuilding

by

ThyssenKrupp is collaborating with Wilhelmsen, one of the largest maritime products and services provider in the world, to jointly develop additive manufacturing enabled commercial solutions for the maritime industry.

Under the Memorandum of Agreement signed by both companies, ThyssenKrupp and Wilhelmsen’s Marine Products division will collaborate on providing 3D-printed components for maritime vessels, leveraging on ThyssenKrupp’s expertise in additive manufacturing alongside Wilhelmsen’s in-depth maritime expertise and direct ongoing experience of developing 3D printing as a service for vessels.

The collaboration will also leverage on the capabilities of the recently inaugurated ThyssenKrupp Tech Center in Singapore and its Global Additive Manufacturing Tech Center in Mulheim, which has been awarded the Approval of Manufacturer certificate by leading quality assurance and risk management firm DNV GL. [Read more…] about ThyssenKrupp and Wilhelmsen to develop additive manufacturing solutions for shipbuilding

ZVerse partners with 3D Systems to provide more access to expertise

by

ZVerse, the developer of a CAD as a Service platform for digital manufacturing, is partnering with 3D Systems, a provider of parts manufacturing services.

The strategic alignment will provide 3D Systems’ customers with access to ZVerse’s network of certified designers who can lend their expertise to optimize file formats – facilitating desired final parts.

Theseservicesincludeeverythingfromdesignmodificationstorevisingfileformats to ensure the final part matches the customer’s requirements. [Read more…] about ZVerse partners with 3D Systems to provide more access to expertise